Cart:

0 item(s) - $0.00
You have no items in your shopping cart.

0

For iPhone 5C Original Front Housing LCD Touch Digitizer Screen Assembly Black

$75.00
Availability: In stock
SKU:000995
OR

Quick Overview

Original LCD with digitizer with small parts for iPhone 5C Black,replace the broken,damaged,dead one

Hot Package

Features:

For iPhone 5C Original Front Housing LCD Touch Digitizer Screen Assembly

The item contains: outer glass + touch digitizer panel (touch screen) + LCD + LCD frame preassembled

Resolution: 1136 X 640 pixels at 326 ppi

Replace your cracked, damaged, broken glass screen or digitizer

LCD and frame are pre-assembled, easy for your installation

Item will be strictly tested before shipping and product quality ensured

Please caution when installing and we will not be hold responsible for the damage if you pinch or tear any cables during install

 

Specification:

Color: Black

Estimated Shipping Weight: 75g

Compatible with: iPhone 5

 

Package Content:

1 x Original LCD with Digitizer Assembly for iPhone 5C


Original LCD with Digitizer Assembly for iPhone 5C


Original LCD with Digitizer Assembly for iPhone 5C


Original LCD with Digitizer Assembly for iPhone 5C

iPhone 5c lcd screen assembly replacement guide

Screen as the face of a cell phone , it is one of the easiest damaged parts. We usually accidently crack or shatter it, then you need get a new lcd display to replace the cracked or shattered one. Don’t worry to send it to the repair store. You only get a new screen assembly, find a repair guid, you can also do the iPhone 5c lcd screen fron panel replacement. Now let’s together have a try, and you will never worry about how to replace the cracked lcd screen for iPhone 5c.

 

First, prepare for repair tools and parts.

A new lcd screen with digitizer assembly for iPhone 5c

Pentaloble screwdriver

iSclack or plastic single suction cup opening tool

Plastic pry opening tool

#000 Phillips screwdriver

A point of Spudger

Adhesive

 

Step 1. Make sure you have powered off your iPhone 5c first.

Step 2. Remove the two pentaloble screws at the bottom of iPhone 5c(Red circle marked in the following picture.).

iPhone 5c screen assembly repair 01

Step 3. Use the special double suction cups opening tool-iSclack to open the iPhone 6 safely.

The special double suction cups opening tool-iSclack opening procedure:

1)      Close the handle on the iSclack, opening the suction-cup jaws, and place the bottom of your iPhone in between the suction cups.

iPhone 5c screen assembly repair 02iPhone 5c screen assembly repair 02

2)  Hold onto your iPhone securely and close the handle of the iSclack to separate the suction cups, pulling the front panel up from the rear case.

iPhone 5c screen assembly repair 04iPhone 5c screen assembly repair 05

3) Take down the suction cup from the lcd screen, then you’ve opened the screen assembly from rear case.


Pre: if use the iSclack, you can safely open your iPhone enough to separate the pieces, but not enough to damage any of the display cables. And you can ignore the following steps until to the step 7. Surely, if you don't have a iSclack, you can also use the single plastic suction cup opening tool, like following steps.

Step 4. Press a suction cup onto the screen, just above the home button, then pressed securely onto the screen to get a tight seal.

iPhone 5c screen assembly repair 06

Step 5. Pry the screen assembly gently, and use a plastic opening tool seperate the rear case from lcd screen with digitizer assembly in a proper distance.

iPhone 5c screen assembly repair 07iPhone 5c screen assembly repair 08

Note: there are several clips attaching the front panel assembly to the rear case, so you may need to use a combination of the suction cup and plastic opening tool to free the front panel assembly. That’s why leave some room in a proper distance when separate the raer case from screen aseembly.

Step 6. Remove the plastic single suction cup opening tool from screen assembly.

Step 7. Pull the home button end of the front panel assembly and keep it supported at a 90º angle in relation to the rear case.

iPhone 5c screen assembly repair 09

Note: before you remove the front screen panel, you should keep it supported at a 90º angle, because there are several cables connecting the rear housing.

Step 8. Remove the following screws securing the front panel assembly cable bracket, and take down the front panel assembly cable bracket from the logic board

   Two 1.3 mm screws(Red mark)

One 1.7 mm screw(Orange mark)

One 3.25 mm screw(Yellow mark)

iPhone 5c screen assembly repair 10iPhone 5c screen assembly repair 11

Step 9. Disconnect these cable connectors from the rear housing with the plastic pry opening tool.

1)  The front-facing camera and sensor cable connector

iPhone 5c screen assembly repair 12iPhone 5c screen assembly repair 13

Note: Be sure to only pry up on the connector, and not on the socket on the logic board.

2) The digitizer cable

iPhone 5c screen assembly repair 14iPhone 5c screen assembly repair 15

Note: The LCD and Digitizer connectors are on the same cable assembly, so prying the digitizer connector up should disconnect both connectors. Double check that the two cables are fully disconnected before removing the display.

3)The front panel assembly

iPhone 5c screen assembly repair 16

Step 10. Remove the two screws securing the home button bracket to the display assembly, and use a plastic opening tool to pry the edge of the home button ribbon cable up.

1.3 mm Phillips #000 screw(Red mark in the following picture)

iPhone 5c screen assembly repair 17iPhone 5c screen assembly repair 18

Note: we’d better Start prying from the left and going right may rip your ribbon cable. The contacts are well adhered to the front panel and should be peeled up first.

Step 11. Remove the home button ribbon cable from the front panel with a tweezer.

iPhone 5c screen assembly repair 19

Step 12. Use your finger tip to lift the home button up fron the right corner, then use the tip of spudger to peel the home button off gently.

iPhone 5c screen assembly repair 20iPhone 5c screen assembly repair 01

The home button assembly has been taken down.

Step 13. Remove two screws(marked in the picture) securing the upper component bracket to the display assembly.

iPhone 5c screen assembly repair 22

    One 4.2 mm Phillips #000 screw(Red mark)

    One 2.3 mm Phillips #000 screw(Orange mark)

Step 14. Use the flat edge of a spudger to push the earpiece speaker bracket off the display assembly.

iPhone 5c screen assembly repair 23

Step 15. Take off the earphone speaker from front panel.

iPhone 5c screen assembly repair 24

Step 16. Using the pointed end of a spudger to gently peel the earpiece speaker contact cable up, and separate this portion of the camera and sensor cable from the adhesive below.

iPhone 5c screen assembly repair 25iPhone 5c screen assembly repair 26

Step17. Slide the tip of a spudger under the microphone to lift the cable out of its recess in the display assembly.

iPhone 5c screen assembly repair 27iPhone 5c screen assembly repair 28

Note: you can also skip the next step(step 18), if you only replace the display assembly. Take off the lcd shiel plate with front camera ans sensor cable directly.

Step 18. Carefully and gently peel the cable assembly off of the LCD shield plate to remove it from the display.

iPhone 5c screen assembly repair 29

Note: From 16-18 step, during these processes, never peel the cable connectors with a strong hand, or you may do the harm to these cables. Because there is mild adhesive fixing the cables and front panel. If meet difficulty to remove it, you can use a heat tool to heat the front panel where the cables is fixed.

Step 19. Remove these screws(two shown in the following picture).

iPhone 5c screen assembly repair 30

1.2 mm Phillips #000 screw (Four screws in total from two side of the lcd frame)

Step 20. next, remove the following screws shown in the following picture.

iPhone 5c screen assembly repair 31iPhone 5c screen assembly repair 32

One at bottom of the display assembly near the home button opening(Red mark)

One at the top of the display near the cables(Orange mark)

Step 21. Take off the lcd shield plate, finally you get the display assembly only.

iPhone 5c screen assembly repair 33iPhone 5c screen assembly repair 34

Then you can use the new screen assembly to reinstall the all iPhone 5c parts you tear down following these steps in return. During the reinstalling processes, you may need adhesive to fix the parts, surely the double faced adhesive tape is also OK.

Please gently to deal with all the parts, then you get a new screen iPhone 5c.



iPhone 5c LCD Screen Assemlby Replacement Guide Download:

000995-iPhone 5c lcd screen assembly replacement guide



You may also be interested in the following product(s)

Write Your Own Review

You're reviewing: For iPhone 5C Original Front Housing LCD Touch Digitizer Screen Assembly Black

How do you rate this product?*
  1 star 2 stars 3 stars 4 stars 5 stars
Value
Quality
Price




Custom magento captcha module from Outsource Online